NTTL0961 Nordic Track EXP 1000X Calibration Mode

Oct 22, 2020

This console has a calibration mode to assist the technician in troubleshooting. To enter this mode, press and hold the Stop and Speed buttons while inserting the safety key.

There are five levels to this mode. Move from one level to the next by pressing the Stop button. Exit this mode at any time by removing the safety key.

Level 1 - This level displays how the console has been configured to operate. It also displays the numerical value of each button as it is pressed.

             TIME (Left 1/2) - Minimum PWM speen signal '6'

             TIME (Right 1/2) - Button Test Values

             SPEED - Maximum Speed '10'

             DISTANCE - Software code version

             CALORIES - Roller Size '1.9'

Level 2 - This level is used to calibrate the inclide and speed of the treadmill. To calibrate incline, press either Incline button. The treadmill will calibrate itself. To calibrate speed, press and hold the Speed button until the Distance window displays an 85% speed signal. Adjust the MAX SPD pot on the controller until the Speed window displays 10.0. Press Speed and allow the treadmill to stop before proceeding. A discreet LED will blink with the incline sensor.

            TIME - Internal test. EP2P = pass, EF2F = fail

            SPEED - Actual speed of the treadmill.

            CALORIES - '1' if hand pulse active, '2' if chest pulse

            DISTANCE - Current PWM speed signal (%)

Level 3 - This level lights each LED on the console in order. The Speed buttons control the speed of the lighting patternIncline toggles all LEDs on and off. Incline Restarts the lighting pattern.

Level 4 - This level displays the total Time and distance of the treadmill. It also shows the current units of measurement.

            TIME - Total time in hours

            SPEED - Units: 'E'=English, 'rn' = metric

            CALORIES- 'd' if Demo mode turned on, else blank

            DISTANCE - Total distance in miles

Level 5 - This level allows a functional test to be performed on the treadmill. The console will show different information:

            TIME - Elapsed Time

            CALS - Actual Speed

            SPEED - target Speed

            DIST - Current Speed Signal %