Icon Fitness SD Card Instructions for Reprogramming the Android Software on a Display Console

Dec 19, 2023

1. Important: Your exercise equipment and components may look different from those shown in the diagrams.

2. Remove the key from the console, press the on/off or reset/off switch to the off position, and then unplug the power cord. Note: Your exercise equipment may not have a key.

3. Remove the back of the console (Not shown.) Refer to the exploded drawings in your user's manual if needed.

4. Locate the component shown above first pic.
    Next, locate the slot labeled Micro SD. Orient the Micro SD card (A) so that the metal tabs face the front of the console. Insert the micro SD card into the Micro SD slot until it clicks into place.
    
5. Plug in the power cord, Press the on/off or reset/off switch to the on or reset position, and then insert the key into the console.

6. When the Micro SD card is properly inserted, and there is power supplied to the console, a black screen with green letters will display on the console. This is the first of a series of different screens, that will display throughout the reprogramming process, which may take up to 15 minutes. Continue to wait until on the above screens apears (Pic 2)    

7. After the screen displayed above appears (Pic 3) in the console, press the on/off or reset/off switch to the off position, and then unplug the power cord. See the drawing in step 4. Push on the Micro SD card (A) to release and remove it. The Android software should now be reprogrammed.