Chat with us
→
Search Part Name & Description
Gathering Results: Please be patient
Use these basic steps to replace the drive motor in ProForm, Weslo, Horizon, Weider, Lifestyler, NordicTrack and Sole treadmills. Shut off the electricity Remove the motor hood Remove the motor Install the new motor Reinstall the motor hood Restore power For more information, check this link: https://www.searspartsdirect.com/diy...
read more
If your Treadmill is Stuck on Full Speed at Startup it's usually one of two things causing this failure 1) Speed Sensor is misalligned, dirty, or just failing 2) PWM Lower Controller is Stuck on active high causing full power to the motor. The good news is, you know your motor works, so it's smart to start at the speed sensor because it's inexpensive to replace. By in large the ...
read more
Here are the steps on how to install a new Flexonic drive belt on Matrix T3x, T3x-06, T3xi-06, and T3xi-AC model treadmills. PROCEDURE: Remove the 4 screws holding on the motor cover and remove it. Disconnect the spring from the tension wheel set and remove the spring. The spring can be discarded, it will not be re-used. Remove the top plate of the tension wheel set. ...
read more
We built and will continue to build out a fitness technician finder by zip code for all your onsite repair needs. Check here: https://www.hydrafitnessexchange.com/technicians...
read more
This DIY repair guide explains how to replace the resistance motor on an elliptical. Follow these steps to replace the resistance motor in Weslo, Lifestyler, NordicTrack , ProForm and Image elliptical exercisers. Instructions: 1. Release the lower upright cover 2. Remove the left pedal arm 3. Remove the left shield 4. Release the resistance motor 5. Disconnect the cable 6. Remove ...
read more
The manufacturer of popular namebrands such as Proform, Nordictrack, Healthrider, Epic, Gold's Gym (and others), Icon Health and Fitness, recently reengineered many of the popular motor controllers used in past and present treadmills, included is a picture is the replacement board for 263165 or MC2100LTS-30 shich is now 398056 MC1618DLS. Included in the box is 1) DETAILED instructions 2) adapter ...
read more
No matter what your fitness goal is, whether it be fat loss, strength/ muscle gain, or cardiac rehab. The best piece of fitness equipment you can buy is the one you’re going to use the most. Think about it...
read more
Another full truckload! All these parts will be stored and hopefully prevent more new treadmills, ellipticals, and Stationary bikes from coming into this world. If you think you need replacement parts and save your machine from the fitness graveyard, email or call. If you're in Chicagoland, and want your machine picked up, don't just waste it by giving it to scrappers who just toss the...
read more
FOD is any object(s) that does not belong on piece of electronic hardware, drive motor, or elevation motor. If dust, dirt, or water make it on to an electronic's board surface short circuiting, speed sensor contamination, and excessive mechanical wear and tear is the result. Take a look at the photo on the left for example, and look closely at the amount of dirt on the...
read more
Step-by-step guide to replacing the wire harness on a treadmill. This process may be slightly different for your machine. Be sure to reference your manual. 1. Remove the Key from the console, unplug the powercord, five hood screws and then remove the motor hood. 2. Disconnect the upright wire harness from the console wire. 3. Raise the right upright cover. 4. First, remove the upright ...
read more6114 Madison Ct.
Morton Grove, IL 60053
847-309-2818
Hydra Fitness Exchange © 2024. All Rights Reserved.
