Phone : 847-309-2818 M-F 10am-5pm

BLOG

Keyword:

Possible Solution to Cybex 770t Treadmill Error 1 Problem

Mar 05, 2020

ERROR 1: No Speed Signal at Startup This error code usually occurs only during start-up and indicates that the computer in the control panel is not receiving any indication of motor speed. To isolate the source of this problem, you need to determine whether the drivemotor tried to start up and did rotate or whether it never came on at all. If the drive motor (and running belt) rotates, even ...

read more

Possible Solutions to Octane Fitness Elliptical Error Code 1 Problem

Mar 04, 2020

CONSOLE DISPLAYING ERROR CODE 1, 2 OR 3 This is a brake error, indicating that the servomotor may not be working properly.   Check the following items to resolve the issue: Are you able to manually move the brake?  Do the shoes move freely? Adjust as necessary. Is the brake cable seated properly in the slot on the brake?  Make any necessary adjustments...

read more

Possible Solutions to Precor Error Code 31 Problem

Mar 03, 2020

Precor Errors 30, 31, 32 and 33  indicate the loss of communications or erratic communications between the microprocessors in the upper PCA and the lower PCA. The troubleshooting procedures for all of them are essentially the same.  Error 31 is defined as faulty data received from lower PCA (extremely rare). The main reason for a general communication error is a faulty ...

read more

Possible Solutions to Proform Error Code 21 Problem

Mar 02, 2020

Error code E21 on Proform treadmill indicates the console is not receiving information from the speed sensor on the front roller. The motor will start, and when the console does not receive the signal that the front roller is turning, it shuts the treadmill off. First, determine if the motor is turning before you get the E21 or not. If the motor turns, the speed sensor is the most likely ...

read more

Press Release: Icon Health & Fitness Redesigns MC2100LTS-30, MC2100LT-12, and MC2100LTS-50W Treadmill Motor Controller Circuit Boards

Sep 13, 2019

If you're repairing your Proform, Nordictrack, Epic, or Healthrider treadmill by replacing the lower motor control board and you're buying a MC2100LTS-30, MC2100LT-12, and MC2100LTS-50W from a parts vendor. Stop, collaborate, and LISTEN... You're in fact buying what is called "new old stock" - meaning, they are purging the last of the discontinued stock in order to receive the freshly ...

read more
  • 40