Blog

Concept2 Rower Model Heartrate Receiver Installation and Use

Oct 08, 2022

Please check attached pdf for Concept2 Rower Model B, C and D Heartrate Receiver Installation and Use...

3000 pounds of treadmills Ellipticals and stationary bikes recycled

Sep 28, 2022

Once more, a complete truckload! All of these components will be kept in storage in an effort to stop the development of additional stationary bikes, ellipticals, and treadmills. Send an email or give a call if you believe you need replacement parts to keep your machine out of the fitness graveyard. If you live in the Chicagoland area and would like your machine picked up, contact us instead of ...

Concept2 Rower Model A B C D E Chain Lubrication

Sep 17, 2022

Lubricating Chain Every 50 Hours of Use. Use 1 teaspoon of 20 weight oil on paper towel. Rub along chain. Wipe off excess. Repeat if needed. Please check the attached pdf how to do it...

Stratrac E-UB / E-RB Preventative Maintenance

Sep 08, 2022

With durable, high performance components, your STAR TRAC E- UB / RB is designed for heavy usage with minimal maintenance required. To keep your bike in top condition, Star Trac strongly recommends performing the regular daily, weekly and monthly preventive maintenance routines outlined below. DAILY MAINTENANCE Perform the following services every day: Remove excessive accumulations of ...

Startrack Recumbent Bikes Brake Generator Troubleshooting

Sep 07, 2022

Please read the attached pdf for Startrack E-Series, S-Series Upright / Recumbent Bikes Brake Generator Troubleshooting...

Startrack Recumbent Bike TBT and Steppers iPod Cable Replacement

Sep 07, 2022

Please read the attached pdf for Startrack Recumbent Bike TBT and Steppers iPod Cable Replacement...

Startrack Recumbent Bike UB/RB Drive Belt Alignment

Aug 09, 2022

Please read the attached pdf for Startrack Drive Belt Alignment for E-Series, S-Series, and 8 Series UB and RB Upright and Recumbent Bikes...

Startrack Recumbent Bikes Seat Latch Not Fitting In Carriage

Aug 09, 2022

Please check the attached document how to fix Startrack E- Series Recumbent Bikes Seat Latch Not Fitting In Carriage...

Stairmaster Steppers 4400CL spring pulley Removal and Replacement

Jul 22, 2022

1. Remove the bottom cover. 2. Unhook the pedal arm return spring from the spring hanger. 3. Remove the snap ring from the pulley shaft WARNING -- To Reduce the risk of eye injury, wear eye protection when removing snap rings. 4. Slide the pulley and washer off the shaft. 5. Before reinstalling the pulley, clean the pulley shaft throughly with a clean, dry cloth. Apply a thin coat ...